All Pro Roofing has over 25 years experience in restoring iron, cement and terracotta roof tiles. David has developed a detailed eight stage restoration process which leaves your old tired roof looking like new at a fraction of the replacement cost. With over 32 available colours and a 10 year Dulux manufacturers guarantee, you can rest assured your roof has been restored to the highest possible standard.

Please Refer to the Videos & steps below for the Roof Restoration Procedures

Step 1: Inspection
The entire roof is inspected for damaged tiles, loose or missing bedding and moss/lichen.

Step 2: Repair/Replace
Damaged tiles and faulty valley irons are replaced.

Step 3: Clean
The roof is cleaned using a high pressure cleaner. No chemicals are used to ensure environmental protection.

Step 4: Rebed
All ridge capping is rebedded, where required.

Step 5: Repoint
Ridge capping is then repointed with a flexible acrylic pointing mix.

Step 6: Sterilise
(Where necessary) Any fungal and algal spoilage must be completely destroyed before re-coating, otherwise the growth will continue resulting the potential failure of the roof restoration.

Step 7: Primer/Sealer
The entire roof area is coated with an acrylic sealer/primer to ensure strong adhesion with the 962 Roof Membrane.

Step 8: 962 Roof Membrane
A water based, highly elastic and strong build coating for application to concrete roof tiles and metal roofs.