With over 25 years experience in restoring iron, cement and terracotta roof tiles. All Pro Roofing has developed a detailed seven stage restoration process. Leaving your old tired roof looking like new at a fraction of the replacement cost. With over 32 available colours and a 10 year Dulux manufacturers guarantee you can rest assured you roof has been restored to the highest possible standard.
Please Refer to the Videos & steps below for the Roof Restoration Procedures
Step 1: Inspection
The entire roof is inspected for damaged tiles, loose or missing bedding and moss/lichen.
Step 2: Repair/Replace
Damaged tiles and faulty valley irons are replaced.
Step 3: Clean
The roof is cleaned using a high pressure cleaner. No chemicals are used to ensure environmental protection.
Step 4: Rebed
All ridge capping is rebedded, where required.
Step 5: Repoint
Ridge capping is then repointed with a flexible acrylilc pointing mix.
Step 6: Sterilise
(Where necessary) Fungal and Algal spoilage must be completely destroyed before re-coating, otherwise the growth will continue resulting in potential failure.
Step 7: Primer/Sealer
The entire roof area is coated with an acrylic sealer/primer to ensure strong adhesion with the 962 Roof Membrane.
Step 8: 962 Roof Membrane
A water based elastromeric high build coating for application to concrete roof tiles and metal roofs. 962 Roof Membrane provides ultimate protection, durability, colour retention and weather proofing. Two coats, each at least 4 times thicker than paint, are applied for complete protection.
Roof Restoration Process